How to fix the broken windows

Make my friends that have not been able to re-install the OS on his computer and blum know how to fix the mistakes and errors contained in the OS Windows XP, below there are ways and tips to fix it if the OS Windows XP on your PC without any problems need to reinstall.

Fixing Installation (Repair Install)

If Windows XP is damaged (corrupted) where you have no other operating system to boot,You can do a repair installation (Repair Install) who works as the setting (setting) the beginning.And weeks to perform the steps in Repair windows are as follows:

•  Make sure you have the key (key) Windows XP is valid.
• The entire process will take less than 1/2 or 1 hour, depending on the spec of your computer.
• If you are prompted for an administrator password, you should select the repair option (repair) the second, not the first.
• Insert your Windows XP CD and boot from the CD.
• When it appeared the second repair option R = Repair, press the R This will start the repair.
• Press the F8 key to agree to proceed "I Agree at the Licensing Agreement
• Press R when the directory where you installed Windows XP. Usually C: \ WINDOWS It will then check the drive C: and start copying files.And automatically restart if needed. Leave the CD in the drive.
• Next you will see a picture of "progress bar" that is part of the improvement, he looks like a normal XP installation, including "Collecting Information, Dynamic Update,

Preparing Installation, Installing Windows, finalizing Installation

• When asked, click the Next button
• When asked to enter a key, enter the key (key) Windows XP are valid.
• Normally you want to remain in the same Domain or Workgroup.
• The computer will restart.
• Then you will have the same screen as the activation of the system when a normal installation.
• Register if you want (usually unnecessary).
• Completed

Now you can log in with your existing account

NTOSKRNL Damaged or Missing (Missing or Corrupt)

If you find an error message that "NTOSKRNL not found" / NTOSKRNL not found, do:

• Insert the Windows XP CD and booting from the CD.
• At R = Repair option appears first, press the R key
• Press the number corresponding to the location of the Windows installation you want to repair.
• Usually # 1
• Change to the CD ROM drive is located.
• Write: CD i386
• Write: expand ntkrnlmp.ex_ C: \ Windows \ System32 \ ntoskrnl.exe
• If Windows XP is installed elsewhere, change according to location.
• Remove your CD and type EXIT
• Completed

Damaged or Missing HAL.DLL (Missing or Corrupt)

If you get an error regarding a missing or corrupt hal.dll file, it is possible BOOT.INI file has the wrong configuration (misconfigured).

• Insert the Windows XP CD and booting from the CD.
• At R = Repair option appears first, press the R key
• Press the number corresponding to the location of the Windows installation you want to repair.
• Usually # 1
• Type bootcfg / list Menampilkn content / feedback on the current BOOT.INI file
• Type bootcfg / rebuild Improve the configuration of the BOOT.INI file
• Remove your CD and type EXIT

Directory \ WINDOWS \ SYSTEM32 \ CONFIG damaged or missing

If you get an error with the inscription:

"Windows Could not Start Because the Following files is missing or corrupt \ WINDOWS \ SYSTEM32 \ CONFIG \ SYSTEM or \ WINDOWS \ SYSTEM32 \ CONFIG \ SOFTWARE "

• Insert the Windows XP CD and booting from the CD
• At R = Repair option appears first, press the R key
• Press the number corresponding to the location of the Windows installation you want to repair.
• Usually # 1
• Enter the administrator password if necessary.
• Write: cd \ windows \ system32 \ config
• Next depending on the location of the damage:
• Write: ren ren system software software.rusak OR system.rusak
• Next again also depends on the location of the damage:
• Write: copy \ windows \ repair \ system
• Write: copy \ windows \ repair \ software
• Remove your CD and type EXIT

NTLDR or NTDETECT.COM not found (NTLDR or NTDETECT.COM Not Found)

If you get an error that NTLDR is not found when booting:

1. For the type of FAT

        Please you boot from the Win98 floppy and copy the NTLDR or NTDETECT.COM file from the  i386 directory to the drive stem / root (root) C: \

2. For the type of NTFS

• nsert the Windows XP CD and booting from the CD.
• At R = Repair option appears first, press the R key
• Press the number corresponding to the location of the Windows installation you want to repair.
• Usually # 1
• Enter the administrator password if necessary.
• Enter the following command, where X: is the address of the CD ROM drive (Sesuaikan!).
• Write: COPY X: \ i386 \ NTLDR C \:
• Write: COPY X: \ i386 \ NTDETECT.COM C: \
• Remove your CD and type EXIT